Additive Manufacturing Process Principles

Collection of Illustrations on Principles of Additive Manufacturing Processes
Download
Complexity for Free and Lot-size 1 Manufacturing (JPEG image, 136.7Kb)
Stair case effect in Fused Deposition Modelling process (JPEG image, 66.04Kb)
Photo of sample made by SLM from Stainless Steel 1.4404 with insufficient Support (JPEG image, 118.4Kb)
Process Chain for direct part production using Additive Manufacturing (JPEG image, 78.18Kb)
Process Chain for indirect part production using Additive Manufacturing (JPEG image, 119.0Kb)
Hybrid Tooling with Selective Laser Melting [based on Concept Laser Process Guideline 2007] (JPEG image, 106.6Kb)
Leg of HyQ-Robot made by different Additive Manufacturing processes and Carbon Fibre Reinforced Plastics (JPEG image, 132.0Kb)
Data Preparation Process Chain in Additive Manufacturing (JPEG image, 258.5Kb)
Support Types in Selective Laser Melting (JPEG image, 294.5Kb)
Hull-Core-Strategy in Selective Laser Melting (JPEG image, 110.9Kb)
Example of surface tessalation in STL-files (PNG image, 540.3Kb)
Result of Topology Optimization and resulting CAD design (JPEG image, 98.66Kb)
Ishikawa 8Fishbone) diagram of SLM-process [tanslated from Rehme 2007] (JPEG image, 2.451Mb)
Surface Defect on SLM parts caused by a worn coater blade (JPEG image, 125.0Kb)
Influences and Scope of Decision for Additive Manufacturing (JPEG image, 251.3Kb)
Lugs manufactured by Selective Laser Sintering (JPEG image, 62.15Kb)
Soldering Aid containing Selective Laser Sintered Parts (JPEG image, 839.1Kb)
Part Orientation on AM Build Platform (JPEG image, 124.4Kb)
Value Drivers of Additive Manufacturing (JPEG image, 319.5Kb)
Cost Distribution of Lugs at Bosch Packaging (JPEG image, 180.9Kb)
Concept of Bridge Manufacturing (JPEG image, 44.26Kb)
Experience Transfer Modell for Implementing new Technologies (JPEG image, 91.03Kb)
Concept of Higher Order Benefits (JPEG image, 128.4Kb)
Part Feedback Form (PNG image, 161.7Kb)
Part Questionair for potential AM parts (PNG image, 416.2Kb)
Thumbnail
Open access
ccbysa
Produzent(in)
Klahn, Christophcc
Datum
2017-08-20
Typ
    Image
Rechte / Lizenz
Creative Commons Attribution-ShareAlike 4.0 International
Persistenter Link
https://doi.org/10.3929/ethz-b-000181623
Beteiligte
Kontaktperson: Klahn, Christophcc
Produzent(in): Klahn, Christophcc
Rechteinhaber(in): Klahn, Christophcc
Verlag
ETH Zurich
Thema
Additive Manufacturing
Organisationseinheit
03943 - Meboldt, Mirko / Meboldt, Mirko  
Mehr
Alle Metadaten anzeigen
ETH Bibliographie
yes
Altmetrics